Technician 1 (Molding) - Shift 2

JOB DESCRIPTION JOB TITLE: Mold Technician 1 FLSASTATUS: Non Exempt Mold Technician 2 Mold Technician 3 REPORTS TO: Supervisor, Manufacturing (Molding) SUMMARY This is a hands-on technical position responsible for molding machine setups, start-ups, operation, and shut-downs. Must follow all standard work procedures including daily use of Summit Lean Manufacturing System tools. Completes process verifications, perform 1st piece/last piece inspections and perform routine quality checks. Responsible for ensuring that machines, molds and equipment are properly functioning and maintained. Identify problems and perform basic troubleshooting, according to knowledge and work experience. Duties will also include general housekeeping, visual production management and product flow, compliance to environmental and safety procedures and assisting with Operator/Utility tasks. RESPONSIBILITIES AND DUTIES: The fully trained and qualified Mold Tech is capable of completing the following tasks under general supervision: Safely performing injection mold changes and machine start-ups in the proper sequence and within time standards Complying with all SPI requirements for Personal Protective Equipment such as, but not limited to, hard hats, heat gloves/sleeves, steel toed shoes, eye protection, etc. Performing lockout/tagout per requirements and safely operating equipment such as cranes, side load systems, hot runner controllers, etc. per standard work procedures. Troubleshooting basic machine and equipment problems Troubleshooting basic robot problems Demonstrating basic knowledge of mold construction and function and is able to assist in the initial troubleshooting process Performing basic Robot End-Of-Arm-Tooling maintenance and repair Completing machine process adjustments, within prescribed limits, to ensure that product meets specifications Identifying non-standard work and machine conditions that are potential safety concerns and taking appropriate action Effectively communicating and advising on product and production concerns with peers on other shifts Assisting the supervisor in managing shift activities and training of operators, utilities and other mold techs. Completing daily production paperwork Utilizing Summit Lean Manufacturing Systems principles to monitor inventory, schedule and run production Following general housekeeping principles Assisting with giving Operator/Utility breaks Assisting, as needed, in the grinding of runners and scrap parts. Training The Mold Tech position is a progressive position requiring diligent completion of training requirements over 3 levels and within prescribed time frames in order to achieve fully qualified status and remain in the position. Level 1 Side Load – Completed within 5 weeks of placement in position Upon completion and under direct supervision, the Tech will: Be able to safely perform a side load mold change and perform the basic quality tasks Have completed the training modules and tests as outlined in the Mold Tech Training Progression Checklist for Level 1 Side Load Level 1 Top Load – Completed within 2 weeks of completion of Level 1 Side Load (6 weeks after hire) Upon completion and under direct supervision, the Tech will: Be able to safely perform a top load mold change using a crane Have completed the training modules and tests as outlined in the Mold Tech Training Progression Checklist for Level 1 Top Load Level 2 – Completed within 18 weeks of completion of the Level 1 Top Load (24 weeks after hire) Upon completion and under general supervision, the Tech will: Be able to safely and efficiently perform both side load and top load set-ups, meeting the time requirements and execution per the standard work procedure Be able to do a full start-up, completing all required checks and documentation Be able to do limited troubleshooting of the process and equipment and make adjustments if required Have completed the training modules and tests as outlined in the Mold Tech Training Progres…