Maint Tech Training I (Train on 1st shift - then go to 12 hour night 7:00pm to 7:15am

**Train on 1st shift and then go to Night Shift - 12 hours.** **JOB TITLE: Maintenance Tech** **Training I JOB GRADE: NE11** **FLSA STATUS: N** **onexempt DEPARTMENT NAME: Maintenance** **DEPARTMENT CODE:** **MAINT REPORTS TO: Supervisor** **\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_** **POSITION SUMMARY** - A Maintenance Technician Training is a job classification for a future Maintenance position. The Maintenance Tech in training should have mechanical and electrical background, trade school or mechatronics classes as indicated in the educational requirements to prepare them for the on the job training they will receive by a qualified maintenance technician. The Technician in Training will receive instruction in basic troubleshooting techniques, trouble analysis and prevention, and machine maintenance and repair principles and techniques. They will receive assessments and reviews, and once training is completed and the member is deemed qualified, the member should be promoted to a maintenance technician position on the 12 hour night shift *most likely*. - Upon Promotion to Maintenance Tech, the member will be presented with the appropriate job description and responsibilities for that position. **ESSENTIAL DUTIES AND RESPONSIBILITIES** (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other appropriate duties as assigned)**:** - Uses basic hand tools to disassemble and repair machinery under instruction by a Maintenance Technician; a Maintenance Technician will instruct the Trainee in restoring equipment to operation in accordance with the design specifications and industry standards. - Performs routine maintenance items such as cleaning, inspection and lubrication of mechanical and hydraulic systems and components; a Maintenance Technician will instruct the Trainee in identifying worn or faulty components and/or unsuitable conditions and correcting as required. - Receive instruction on installation and/or replacement of mechanical drive system and hydraulic motion control system components including preforming necessary adjustments and alignments on components, such as: motors, couplings, sheaves, sprockets, cylinders and linear slides. - Receive instruction on performing routine repairs using concrete instructions; participates in troubleshooting activities and involved repairs under the instruction of qualified technicians; uses basic electrical testing devices such as voltmeters, ammeters, ohmmeters, or mega-ohmmeters in order to assist Maintenance Technicians in measurement and testing of electrical circuits and components. - Provides input for performing in-depth root cause analysis and makes recommendations for countermeasures. - Utilizes plant CMMS to look up, print and enter data into Work Orders; Utilizes plant CMMS to identify and locate spare parts required for PM / MMOL activities. Organizes and stages spare parts to facilitate use by Maintenance Technicians during these activities. - Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and G5S (Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed - Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials This job has no supervisory responsibilities and no direct reports. - **III. REQUIRED COMPETENCIES** - Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly. - Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. - Functional & Technical Expertise and Computer Skills: Acq…